Saturday, October 5, 2019
Concert Report on Smokey Robinson Essay Example | Topics and Well Written Essays - 1250 words
Concert Report on Smokey Robinson - Essay Example The NYCB Theater is among the top music theaters in New York City. Being among the most famous venues for music festivals in the country, the NYCB Theater was in a good position to host the Smokey Robinsonââ¬â¢s concert in New York. Firstly, the theater is more spacious than most music theaters in the US. This indicates that the NYCB Theater was the only theater capable of hosting an event of such a caliber as the Smokey concert. Smokey Robinson has many fans from within New York City and other major cities across the country. The attendance at the theater clearly demonstrated how Smokey Robinson is popular among his followers. The attendance of his show proved that R&B music is still popular among American despite previous claims that R&B song are losing ground to other music genres such as hip hop. This is due to the number R&B stars that are currently switching to hip-hop and rock music. Major R&B singers such as Whitney Houston have redone some of their songs in hip-hop in ord er to incorporate the preferences of the American society. The concert proved to me that R&B music still has many fans within the country. Musial theater performance is not like any other performance. I had previously come across this fact through my studies on theater and performances. Unlike other theater performances, musical theater performance can be described as a two-way performance. This indicates that a successful performance will depend on the effort of the performer and the audience. A musician performing on stage requires the response of the audience in order to achieve successful delivery. This response will include appraisal by the crowd and positive response of the audience. A performer will also prefer an audience that joins him or her in the performance. This will involve situations where a musician allows the audience to sing certain segment of his song or dance rhythmically to his song. I had learnt the theoretical concept on the importance of a responsive audienc e but I had not had a real life experience of such scenarios. The concert therefore presented me with an opportunity to verify the importance of a responsive audience to a performance. During the performance, I also had the opportunity to verify the effect that the audience have on the artist. Robinson opened the concert with his hit song Miracle that got the whole auditorium into shouts and screams of joy. Everyone who present in the theatre wanted to be next to Robinson as possible. If it was also possible, some people could have joined the superstar on the stage. However, the theater was so fully packed with fans and therefore, joining him on the stage was not possible. During this time, I discovered that Smokey is not only a songwriter and a performer, but also has a good background on crowd psychology. Similarly, he was well versed with the fact that the success of performer depends on the attitude of the audience. Smokey therefore utilized the first minutes of his performance trying to get the audience into the same tempo as his ensemble. The performer also utilized these crucial moments trying to make the audience anxious about his performance and the expectations of the show. His hit song ââ¬Å"Miracleâ⬠compensated his expectations for the performance. During the performance, I realized that this song has many fans and, it is among his most famous song from his last album. After singing the first few lines of the song
Friday, October 4, 2019
The Brief Wondrous Life of Oscar Wao Essay Example | Topics and Well Written Essays - 1250 words
The Brief Wondrous Life of Oscar Wao - Essay Example ois Macomber.ââ¬â¢ This paper helps to provide an insight into how the author has made use of the feeling of absence very beautifully in the story as he talks about how the lives of people in the shadow of dictatorship and living in exile were full of loss and has also pointed out absence in the form of immigrants. In the middle of Oscarââ¬â¢s pathetic existence, Yunior tells the story of how terrifying it was to live under the dictatorship for Oscarââ¬â¢s mother and grandparents. They underwent blood soaked years of the Trujillo dictatorship full of paranoia, torture, secret police, murder and fear. à These are the words that describe life in a small, tropical dictatorship run by a psychopath.à Not coincidentally, they also describe the legacy of the Twentieth Century. The book helps in describing the dark path that the immigrant, Oscar, was made to tread upon and the various events that he went through during the course of his lifetime. The idea of absence has been provided in a very descriptive manner as the author has tried to point out instances with respect to the emotion. The first taste of absence maybe felt by the readers by the mention of the immigrant family that Oscar was from. Immigrants are people who have been forced to flee their home countries and live elsewhere because of social or moral issues prevailing within society. In actuality, they are not able to fit well within other societies because of problems of acceptance faced by other people around them. Thus, they feel lonely and are one of the most key aspects of describing absence and loneliness. Furthermore, Diaz has made use of the backdrop of dictatorship and exile under the purview of which the protagonists of the story were living. The author describes the absence of friendship and prevalence of loneliness in Waoââ¬â¢s life; ââ¬Å"In the old days when his so-called friends would hurt him or drag his trust through the mud he always crawled voluntarily back into the abuse, hour of fear and
Thursday, October 3, 2019
Curriculum revision Essay Example for Free
Curriculum revision Essay It is no news that many improvements have taken place in the educational system of the country over the last two decades. Many scientific discoveries have become available as tools to hasten acquisition of productive education that would be useful in contributing effectively to the development of the nation. Arts and science have evolved newer and bigger methods of communication vital for excellent teacher-student relations. Indeed, all forms and work s of life have undergone serious transformations that have made life more compatible with the Earth. Therefore, it would obviously be a futile effort to remain dogmatic and still stick to old school curriculum. Some of the contents of the curriculum are moribund and are inconsistent with the speed of technological advancement. These would not produce 21st century students that can compete favorably with their colleagues from other schools in the Country. As the world progresses, the curriculum must be revised and improved. This need for revision can not be overemphasized as it can be seen in the speed of revisions of many books. Editions change rapidly ever year incorporating new writing skirls that make referencing less burdensome; these also feature printing developments in the form of schema builders like colored pictures, radiological tools, digital and laser printing. All these make reading more pleasurable and books more alluring to the eyes. It is important to emphasize the major that actually need such revision: writing skills have to advance tremendously. Better syntax need be incorporated: this is intended to accommodate new rules of concord. With this, the knowledge of grammar of students is significantly century-compliant. Simple English would convey the information better. Styles of writing such as the APA American Psychological Association, MLA [Modern Language Association] and other referencing styles such as Harvard, Oxford or Chicago should be integrated in the revision. These are indeed indispensable as they ease reading, make references more accessible, and promote further study on the subject of concern. These also encourage the learning of the language, in relation to other fields on interest. The singular most important tool that upholds education in this age is Technology. It is just inevitable for productive and responsive training in any field. The use of Audiovisual aids for teaching and learning, information transfer through such facilities as the Internet shrinks the world to a global village. Thus, the teacher-student distance has reduced drastically. This access as made education livelier and closer than it used to be in the old days. Better printing gadgets have also added glamour to written materials. The use of Slide shows with PowerPoint and other computer application packages have aid knowledge and research. These are extraordinary and highly welcomed. Incorporations of these into the curriculum can not be overemphasized. Teachers would be better equipped to discharge their duties and students would be more receptive to teaching. Really, It is only a fool who trek one thousand miles barefooted to deliver an urgent mail when he has been offered a car for the same trip.
Efficiency Of Step Down Transformer Biology Essay
Efficiency Of Step Down Transformer Biology Essay This extended essay deals with the efficiency of step down transformers in relation the current drawn in the secondary coil. Transformers are one of the most widely used components in electronic devices. Due to its ability to effectively convert voltages to a desired EMF (electro motive force), I thought that analyzing the efficiency of such a device could provide valuable insights for in order to cut power losses; an issue that is becoming a growing concern with the depletion of fossil fuels. My initial hypothesis was that a greater current drawn in the secondary coil would result in a greater efficiency. This was based on a mathematical proof. My experimentation with the step down transformer gave me results that supported my initial hypothesis, thus suggesting that the efficiency increased with an increase in current drawn. This was plotted on a graph, and a linear relationship was obtained. The data was not as precise as preferred, as there were reasonable errors with efficiency. However, this was due to the equipment used. The data that I collected was highly accurate as the R2 value of the graph obtained was 0.985. The strong evidence in favour of the relation has led me to believe that an optimum output current can be identified for each device to minimise power loss in the device as a whole. Considering the number of electronic devices that use transformers today, it will assist in ameliorating the energy crisis. However, further research as well as inclusion of step up transformers will provide more conclusive evidence. Word Count: 254 Contents Introduction: Power Transmission The electricity that is generated at the power stations has to be brought to our households and industries to be of any use. The power could be brought to us in two ways : By using a low voltage and high current By using a high voltage and low current This is true because of the relation P = VI, where P is power, V is voltage and I is Current; so in order to keep the power constant as the voltage increases the current must decrease and vice versa. If option 1 high current and low voltage is used, then there will be a tremendous loss in energy. As the current passes through the wires connecting the power stations and our homes, there is a heating loss which is equal to I2R. So, greater the current, greater the loss in energy. Hence it would instead be more viable to use extremely high voltages and miniscule currents in order to transport the electricity. However, in order to avoid the heating loss, the electricity is transported at a voltage which is of the order of 106 Volts, while are household appliances run on current with a voltage of about 10 -20 Volts. Thus a device is needed which can alter the voltage of the current. This is where a transformer comes in. Transformer Figure Source: http://www.constructionknowledge.net/electrical/images_electrical/transformer.jpg, February 6th, 2010 A transformer consists of a soft iron core with coils of wire on either end. It works on the basic principle of electromagnetic induction. Thus when a current is passed through the primary coil, a second current is induced in the secondary coil. However, in order for there to be any induced current in the secondary coil, the voltage in the primary coil has to be continuously altering (which will result in a change in magnetic flux associated with the secondary coil). Hence, an AC current has to be used. Depending on the ratio of turns of the primary coil to the secondary coil, the transformer can be step up or step down. If the primary coil has more number of turns it is a step down transformer while if the secondary coil has more number of turns it is a step up transformer. As with any other device, transformers are not 100% efficient. Transformers loose energy in four main ways Heating loss in the wires Formation of eddy currents Hysteresis loss in the transformer core Back emf induced by the secondary coil In this essay, I shall focus on efficiency of step down transformers, and how it is related to the current obtained. Efficiency In any device efficiency is defined as power output divided by power input. When specifically related to transformers, efficiency refers to the ratio between the power in the secondary coil and the power in the primary coil. As said before, power is measured through the formula P = VI, and due the losses of energy stated, the efficiency is never 100%. Hypothesis If the power in the Primary coil is Pp with a voltage Vp and current Ip, and the power in the secondary coil is Ps, with voltage Vs and current Is, the efficiency, . Since my focus is limited to the relationship of current in the secondary coil, I shall attempt to keep the power in the secondary coil constant. Thus, the by varying the current and voltage in the primary coil, I will be able to vary the the current in the secondary coil. If for different I values, the input power changes, then the efficiency too will change indicating a relationship. My hypothesis is that the efficiency will be related to the current in the secondary coil. This is because three main modes of losses in energy in transformers are related to current. Hysteresis is proportion to the square of the current, heating losses are calculated by the formula I2R and back emf too depends on the current in the secondary coil. Thus, variations in current will affect power loss, and hence energy. However, a linear relationship is not expected. Firstly, there are three different quantities that are being affected, and second, each of those quantities themselves are not linearly related to current in the secondary coil. This experiment could help in assessing the optimum current that should be drawn in order to ensure optimum efficiency. This would have major ramifications in devices which use transformers; for example, electric arc welders use extremely high currents at extremely low voltages. This results in heat loss through I2R which would melt the metal. Hence, step-down transformers are essential components of electric arc welders. Thus, if the efficiency were to depend on the current drawn, (as I hypothesize), it would have to be taken into consideration by producers and consumers alike. Mathematical Proof of Hypothesis However, the problem may not be as simple as it looks. Since the current affects energy loss in three different ways, a change in it may cause the energy losses to change in different ways. Thus if one mode of loss of energy increases with increase in current, while the other two are inversely proportional, this experiment may not be able to accurately explain the separate components individually, but should be able to identify the optimum current as it takes into account the net effect of the change in current. Interestingly, keeping the power output constant will allow me to keep the numerator of efficiency constant. If I take ÃŽà ± to be the energy lost, then the equation becomes: The initial ratio should be equal to 1 as the total power induced in the secondary coil plus the energy lost should be equal to the energy in the primary coil; this is derived from the principle of conservation of energy. Taking this to be a y= mx+c graph, one would assume that ÃŽà ± is the c. However, since in this experiment, power output is kept constant, becomes the c. Hence, for the equation to be of the form y=mx+c, it should be modified to:` However, in order to derive a relationship between the energy loss and the input current alone (as a first step to later deriving the function between efficiency and output current), I will have to have only two variables in the equation. Since Vp is a function of current, i.e. Vp = IpR and let as it is a constant, the equation can be further simplified to: Since, I am looking to minimize energy loss or, differentiating the equation should give a rough indication as to the trend to be expected. Differentiating with respect to Ip Minimizing means that should be as low as possible, ideally 0. Thus when becomes 0, becomes 0. Hence, lower the value of Ip, lesser the energy loss. What this implies is that the opposite would be true in the secondary coil a low primary current means a high secondary current. Thus, the heat loss should be the least when the current in the secondary coil is high. However, this might be a special case, as here the power in the secondary coil is constant. While the math does give me a basis on which to form a hypothesis, and could help explain the results if they support the hypothesis, it cannot be used directly in my data processing. The main reason for this is that the resistance of the circuit is unknown in my experiment. Though I am influencing some portion of it through the resistance box, there is no way that I can determine the resistance of the entire circuit. Hence, I will not be able to use the equation directly in my processing. Instead, I will use a slightly approximate method that will help me identify the trend, though it would not help me quantify the resistance. I will use a graph of efficiency versus output current. Thus, based on the trend that I get, I could verify if the initial hypothesis was correct if efficiency increases with output current, the hypothesis would be proven correct. Design of the experiment The biggest difficulty in the design of the experiment is maintaining the output power constant. Now, the only way that this can be achieved is through trial and error. Also, varying the input voltage to current ratio, will vary the output voltage to current ratio in the opposite way (assuming no variation due to energy losses). Thus the varying of the input V-I ratio will also assist in developing the ÃŽà · versus Is graph later on. One of the major drawbacks of this design and line of reasoning is that it is not taking eddy currents into consideration at all. Therefore I will use industrially manufactured transformers which have heavily laminated cores. This will ensure that eddy currents are reduced as much as possible. Using industrially manufactured transformers however has its own set of problems. The transformers that can be used for this experiment (as in small size, of operation specifications such as 220V-12V or 6V-220V) can hold only small currents (a maximum of 2-3 A). Hence, the range of readings I will be able to obtain will be limited to some extent. Even the industrially manufactured transformers hardly ever have efficiencies in excess of 50%. What remains to be seen though, is how this ratio changes with a change in the current drawn. The Circuit The circuit has to be properly equipped to keep the power output constant. The power supply will be a dimmer stat as this will allow me to place a variety of voltages across the circuit. I will also use a load/rheostat in the secondary coil so that I can keep the power constant even with changes in efficiency for example, if the efficiency increases with increasing current, a n increase in voltage in the primary coil will result in a greater increase in power in the secondary coil than before. The resistor will help me neutralize these variations. This set up will then be connected to an ammeter, and then the primary coil of the transformer. The secondary coil will have an ammeter connected in series and a voltmeter connected in parallel. Data Collection and Processing The first step in the data collection is to identify the raw data table. Since the variables that I am measuring are the currents and voltages in the primary and secondary circuit, these values will be part of my raw data table. Also, integral to the design are the chosen power output and the resistance that is being applied on the secondary coil to ensure this. Hence, these two will also be an important part of the raw data table. Thus the data table will look something like this: I have included one example to elucidate my data collection and method of processing Output Power Output Current Output Voltage Input Current Input Voltage 1.3936 8.71 0.160 2.61 1.610 The data however needs to be processed further in order to be interpreted. I first need to calculate the input and output powers. Both are calculated the formula P = VI. Since, I am trying to keep the output power constant, the output power is predetermined at 1.39 W. The input power is hence 2.61*1.610 = 4.2021W. The efficiency is hence, , = = 0.3316 This same process is repeated for every reading that I took, and hence I got my processed data table. The processed data table will consist of the output current and the efficiency with their respective uncertainties. The error propagation is described below, while the graph follows after. Processed Data Table Output Current in mA (I) Uncertainty in mA à ±ÃŽâ⬠I Efficiency (ÃŽà ·) Uncertainty à ±ÃŽâ⬠ÃŽà · 7.81 0.05 0.3065 0.01720 8.71 0.05 0.3316 0.01965 4.82 0.05 0.2071 0.00962 5.09 0.05 0.1928 0.00896 4.92 0.05 0.1859 0.00854 4.90 0.05 0.1852 0.00849 7.41 0.05 0.2816 0.01529 6.23 0.05 0.2417 0.01220 5.83 0.05 0.2224 0.01086 8.22 0.05 0.3165 0.01825 4.12 0.05 0.1714 0.00757 3.24 0.05 0.1292 0.00555 3.69 0.05 0.1562 0.00674 4.39 0.05 0.1791 0.00803 3.88 0.05 0.1422 0.00614 Error Propagation: Errors are a very important part of any experiment, as no process is perfect. Since readings are not perfectly precise, the upper and lower limits of uncertainties in the values have to be defined. I will start with the uncertainties in raw data. Uncertainty for current output: à ±0.05mA This is determined due to the random error involved. The systematic error was only 0.01mA (the least count of the digital multimeter), and as the random error was greater, it was discarded. The random error was quite big since there were fluctuations in readings. I took multiple repetitions for a couple of currents, and hence determined the random error. So for output current the repetitions are shown below: Reading 1 Reading 2 Reading 3 Uncertainty 4.86 4.94 4.90 à ±0.04 8.65 8.77 8.71 à ±0.06 Hence average uncertainty is (0.04 + 0.06)/2 = 0.05 Thus the absolute uncertainty for output current was determined to be à ±0.05 mA. The same process of taking multiple readings for each of output voltage, input current and input voltage. Interestingly, uncertainty in input current was the same as that of output current which is à ±0.05mA, while the uncertainties in both input and output voltage were à ±0.005V. Though it would have been more precise to take multiple readings every single time, this proved to be very difficult due to the limitations of the dimmer stat. Hence, I took multiple readings only for 2 values in each of them. Quantity Reading Uncertainty Input Current 3.120 à ±0.05mA Output Current 4.900 à ±0.05mA Input Voltage 2.417 à ±0.003V Output Voltage 0.285 à ±0.003V These errors have to be taken forward to the respective powers as well. Since P = VI, Power Input = Vi*Ii, = 3.12*2.417 = 7.5410mW = à ±0.13645mW Similarly, Finally since , Hence and This method of error processing is done for every reading. I have shown only one example her, but the rest are in the appendices. Now that the processed data as well as the errors have been defined, a graph can be obtained. The graph is basically the efficiency versus the output current. This will help identify the trend and hence the implications. Graphical Analysis The graph is a straight line graph showing a direct relationship between efficiency and output current. Since the variables are directly proportional, the greater the output current, the greater the efficiency. The current has been taken on the x-axis as it is the independent variable while the efficiency is on the y-axis as it is the dependent variable. The error bars have been included. However there are two anomalous points (3.88, 0.1422) and (4.82, 0.2071). A line of best fit has been incorporated with an R2 value of 0.985 which indicates very accurate data. Thus the data that I have collected supports the initial hypothesis that I made. While I have mathematically supported the hypothesis earlier, the physics-explanation is still left. In order to answer this, I will look at each of the three current related sources of energy loss separately. I will start by analysing the heating loss in the wires of the transformers. This is determined by the formula I2R; since the resistance can be rewritten as , the heating loss can be rewritten as . Thus, since the heating loss is directly proportional to the length of the wire, the longer the wire the greater the loss in power. As the current output is large, it implies that the current input is low, which means that the transformer is a step down transformer. Since in a step down transformer, Ns Next, we come to hysteresis loss. Hysteresis loss, according to an article by the eccentric scientist Nikola Tesla, is proportional to the square of the input current. Thus, it can be inferred that the efficiency increases with increasing current in the secondary current as the hysteresis loss follows the opposing trend. Last but not the least, we come to back emf. Interestingly, this source of power loss also fits the hypothesis. Back emf refers to the emf that is re-induced by the secondary coil in the primary coil. This emf, thus opposes the initial emf that is present, and in overcoming this, there is some loss of power. Thus, the greater the change in emf in the secondary coil, the greater the power loss due to back emf. As current increases in the secondary coil, the emf reduces, and hence so will the change in emf due to the alternating magnetic flux. Thus, a greater secondary current will reduce power loss due to back emf as well. Thus we have seen the physical explanations for the data that I had collected. As I said earlier, one major problem is the complete negligence of eddy currents. That however cannot be helped given the limitations of my design. Application of findings to real life: The above findings have great implications on any device that uses transformers. Due to the relation that has arisen, a higher efficiency is an inherent property of any step down transformers, while consequently, step up transformers tend to have lower efficiencies. Thus producers and consumers of devices which use these transformers need to take this into consideration. Take the electric arc welder for example. This is device that works at extremely low voltages with extremely high currents. Thus, the normal 220V that is available on the mains has to be stepped down, and hence it uses a step down transformer. Thus, the efficiency of the device would tend to be reasonably high. Extending the same ideas to power transmission systems, the opposite effect is noticed. Due to the Joule heating effect, power is normally transmitted at high voltages and low currents. Hence when it reaches the households, the power has to be stepped down. Here though, the relative change in voltage is comparatively far lesser than in the electric arc welder. Thus the efficiency here will be a lot lesser than in the electric arc welder. Thus, this power loss has to be taken into consideration when planning out the power transmission systems. The optimum voltage to current should be determined so that the total power loss between the transformer, as well as the wire should be as less as possible. Thus, using the relation from this data as well as the Joule-heating effect, the power loss has to be minimized for the whole system and not just the loss during transmission in the wires. Conclusion and Evaluation Source of Error Like any other experiment, there are errors are present here.. These were: First, eddy currents were not taken into consideration. In order to overcome this, I used laminated cores. The problem with eddy currents is that they cannot be quantified using the data I could collect, and hence I could not calculate them. Also, it is next to impossible to nullify them completely. However, as this was present through all readings, it becomes a part of the systematic error. As this is negligible (the x-intercept of the graph is very close to 0), it can be concluded that eddy currents did not affect the readings by much. The second major source of error was my crude method of keeping power output constant. Starting with the insensitive dimmer stat, I could not control the power output to more than 3 significant figures. Thus there were variations in the power output which were of the order of 10-3. This too would have added to the error caused. This though would have been part of the random error, as it varied from reading to reading. However, due to the fact that multiple readings were taken, the error would have been minimized. Another source of error is the resistance in both circuits. The resistance in both circuits was unknown. Though I did determine some portion of the resistance through the resistance box, the wires were not ideal, i.e. they too had a resistance of their own. The power loss from these wires is thus not accounted for. To be more accurate, this too should be calculated and subtracted from the total power loss to get the power lost only in the transformer. Improvements in design: First of all, a more sensitive dimmer stat must be used. This basically means that the least count of the dimmer stat should be 1mV so t5hat fine tuning can be done. Second, wires of known resistivity and length should be used. This will help make the readings more accurate as then power lost in the external circuit can be removed. Also, I used only 1 transformer throughout my experiment. Though multiple readings were taken, random error could have been further minimised by using multiple transformers. Scope for further research My experiment was limited to just step down transformers. Though a relation was identified, it remains to be seen whether the relation will hold or become the opposite with step up transformers. The reason behind this is that the turns ratios of step up transformers follow an opposite trend to that of step down transformers, i.e. in step down transformers Ns Reflections For me, this extended essay was much more than just a requirement to be fulfilled in order to complete the IB Diploma. Throughout this process I have gained valuable hands-on experience which I am sure will help me in my further studies. Apart from pushing the boundaries of my knowledge, I have also developed my research skills. Not only have I figured out how to go about a basic research project, but I have also learnt not to be disappointed in the face of setbacks. This essay was my third one, as problems arose in the first and second ones. Although I was initially disheartened, now I regard them as being equally important experiences, as I have realized that failure is part of any scientific process. In fact, it was the first couple of failures that helped me understand the subject better than I could have hoped. Personally this was a deeply enriching experience that I know will assist me for a long time to come. Bibliography Feynman, R. P. (2005). The Feynamn Lectures on Physics, The Definitive Edition Volume 2. Addison Wesley. Halliday, R. a. (2004). Fundamentals of Physics. Wiley. Heathcote, M. J. (2007). The J P Transformer Book: A Practical Technology of the Power Transformer. Newnes. Tsokos, K. A. (2008). Physics for the IB Diploma. Cambridge: Cambridge University Press. http://en.wikisource.org/wiki/The_Losses_Due_to_Hysteresis_in_Transformers http://www.citycollegiate.com/transformers2.htm http://www.constructionknowledge.net/electrical/images_electrical/transformer.jpg http://www.copper.org/applications/electrical/energy/trans_losses.html http://www.elkor.net/pdfs/AN0305-Current_Transformers.pdf http://www.allaboutcircuits.com/vol_2/chpt_9/2.html http://www.conformity.com/artman/publish/printer_47.shtml http://www.losgatosmanufacturing.com/classes/handouts/arc_welding_unit.pdf Appendices Appendix 1 My raw data is presented below Output Current in mA (Is) Output Voltage in V (Vs) Input Current in mA (Ip) Input Voltage in V (Vp) 7.81 0.179 2.65 1.721 8.71 0.160 2.61 1.610 4.82 0.290 3.01 2.242 5.09 0.273 3.09 2.333 4.92 0.283 3.12 2.401 4.90 0.285 3.12 2.417 7.41 0.188 2.75 1.799 6.23 0.223 2.85 2.017 5.83 0.239 2.94 2.131 8.22 0.169 2.63 1.669 4.12 0.338 3.28 2.477 3.24 0.430 3.51 3.073 3.69 0.376 3.49 2.545 4.39 0.317 3.21 2.420 3.88 0.360 3.41 2.880 Appendix 2 The processed data without the errors is represented below: Output power in mW (Ps) Input Power in mW (Pp) Efficiency (ÃŽà ·) 1.3980 4.5607 0.3065 1.3936 4.2021 0.3316 1.3978 6.7484 0.2071 1.3896 7.2090 0.1928 1.3924 7.4911 0.1859 1.3965 7.5410 0.1852 1.3931 4.9473 0.2816 1.3893 5.7485 0.2417 1.3934 6.2651 0.2224 1.3892 4.3895 0.3165 1.3926 8.1246 0.1714 1.3932 10.7862 0.1292 1.3874 8.8821 0.1562 1.3916 7.7682 0.1791 1.3968 9.8208 0.1422 Appendix 3 This is the data with the uncertainties included. Output Current in mA (Is) Uncertainty in mA (ÃŽâ⬠Is) Output Voltage in V (Vs) Uncertainty in V (ÃŽâ⬠Vs) Output power in mW (Ps) Uncertainty in mW (ÃŽâ⬠Ps) 7.81 0.05 0.179 0.005 1.3980 0.0480 8.71 0.05 0.160 0.005 1.3936 0.0516 4.82 0.05 0.290 0.005 1.3978 0.0386 5.09 0.05 0.273 0.005 1.3896 0.0391 4.92 0.05 0.283 0.005 1.3924 0.0388 4.90 0.05 0.285 0.005 1.3965 0.0388 7.41 0.05 0.188 0.005 1.3931 0.0465 6.23 0.05 0.223 0.005 1.3893 0.0423 5.83 0.05 0.239 0.005 1.3934 0.0411 8.22 0.05 0.169 0.005 1.3892 0.0496 4.12 0.05 0.338 0.005 1.3926 0.0375 3.24 0.05 0.430 0.005 1.3932 0.0377 3.69 0.05 0.376 0.005 1.3874 0.0373 4.39 0.05 0.317 0.005 1.3916 0.0378 3.88 0.05 0.360 0.005 1.3968 0.0374 Input Current in mA (Is) Uncertainty in mA (ÃŽâ⬠Is) Input Voltage in V (Vs) Uncertainty in V (ÃŽâ⬠Vs) Input Power in mW (Ps) Uncertainty in mW (ÃŽâ⬠Ps) 2.65 0.05 1.721 0.005 4.5607 0.09930 2.61 0.05 1.610 0.005 4.2021 0.09355 3.01 0.05 2.242 0.005 6.7484 0.12715 3.09 0.05 2.333 0.005 7.2090 0.13210 3.12 0.05 2.401 0.005 7.4911 0.13565 3.12 0.05 2.417 0.005 7.5410 0.13645 2.75 0.05 1.799 0.005 4.9473 0.10370 2.85 0.05 2.017 0.005 5.7485 0.11510 2.94 0.05 2.131 0.005 6.2651 0.12125 2.63 0.05 1.669 0.005 4.3895 0.09660 3.28 0.05 2.477 0.005 8.1246 0.14025 3.51 0.05 3.073 0.005 10.7862 0.17120 3.49 0.05 2.545 0.005 8.8821 0.14470 3.21 0.05 2.420 0.005 7
Wednesday, October 2, 2019
Cultural Achievements of the Italian Renaissance :: Papers
Cultural Achievements of the Italian Renaissance Humanism was a key movement in the Renaissance and had a major influence on the cultural changes and achievements. Humanists studied history; they were particularly interested in Ancient Greek and Roman civilisation, and classical works, as well as in contemporary history and politics. Although the Humanists were Catholic, their ideas were more secular - "learning emerged from the cloisterà ¢Ã¢â ¬Ã ¦ to rejoin the human mainstream." The humanist ideas soon spread into the classroom. Previously, learning had been ecclesiastical - theocracy and theology were taught a lot - but during the Renaissance, learning became more secular. It was based upon classical culture so students studied classical authors, philosophers and mathematicians, for example: Ovia, Cicero, Livy, Plato and Aristotle. More progress could be made now that learning was not entirely based upon the church. Ideas soon spread due to the invention of the printing press in Germany in 1469; an ability to communicate to the masses quickly and reliably was a major cultural achievement. Books became much more accessible, and this in turn was a factor in many people learning to read and write. Before printing, most people were illiterate and very few books were in existence, as they had to be hand-written. Often the only book available was the Bible, which was copied out over a long period of time by a member of the clergy. Mass production of books was a very important development during the Renaissance as it meant that all the new ideas were obtainable to many more people than would have been the case, had printing not been invented. Authors of the time include Dante (poetry) and Machiavelli (prose). The famous "Book of the Courtier" by Castiglione, goes into great detail about the attributes of the ideal courtier. Some of these attributes had only come to be regarded as important during the Renaissance, due to the sudden interest in, and ideas about culture: "he should have a knowledge of Greek and Latin [and be] very well acquainted with the poetsà ¢Ã¢â ¬Ã ¦ orators and historians".
Tuesday, October 1, 2019
House of the Spirits, Major Motifs Essay -- English Literature
House of the Spirits, Major Motifs Politics Pedro Tercero brought Socialism to the peasants of Tres Marias, and got Jaime very interested in justice, equality, and the peasant movement. The peasants want their feelings to be heard and want a socialist style of government, but they are afraid that Esteban Trueba will find out and kick them out of the estate. The people of Tres Marias have no desire to vote because they know that the ballots are changed. Pedro Tercero tries to make the people understand that this election will be different; there will be people from the socialist party watching the ballot taking and the ballot boxes will be sealed. The people of Tres Marias are beginning to understand how their problems can be solved, and how people should really be living. Esteban Trueba however, is on the other side of the political wings he needs full control over the peasants so his estate will function, he believes that the peasants canââ¬â¢t rule themselves. If his people vote for a socialist government he canââ¬â¢t kick them out because then heââ¬â¢ll have to kick everyone out, he will do more harm to himself through anger. Power Men are losing power. Jean de Satigny is handsome and a French count from all around the world, unlike other men, he has experienced what the world has to offer. He is civilized and has lots of money to flaunt to his lover, but even though he has so much he canââ¬â¢t get Blanca to marry him. Someone with so much has no power over the women he wants. Esteban has no power over Clara when he needs it most, and when he wants complete control over her she can avoid him or hide from him. He tries to go back to raping peasants, but he canââ¬â¢t lift them up onto his saddle because his age. H... ...ut Esteban doesnââ¬â¢t understand the unexplainable attraction of love and sees it as bondage of two people from the same class. The love between Blanca and Pedro Tercero is the strongest love in the whole book. The devotion of the two to stay together through all the years is something close to magic. Starting out from playing in mud and sleeping naked under the dinner table on top of each other like two fitting puzzle pieces, perfect. Then through the years getting more and more serious until their love cannot be separated by Estebanââ¬â¢s skeptical morals. They start to sneak out at night to meet by the river where they embrace and make love ending in the same position from when they first met. The love between the two lovers is natural not between class, money, family, or looks, but between two people who found love and will never let anyone take it from them.
Physical & Chemical Porperties of two Metals Essay
Purpose The purpose of this lab is to examine the physical and chemical properties of Magnesium and Copper. Definitions: Chemical change: A chemical change is a kind of change in which a specific type of matter is converted to a new one. Physical change: Physical changes are those in which a change in the form, but not the composition of matter occurs. Physical property: Physical properties can be observed or measured without changing the composition of matter, they are generally used to observe and describe matter. Chemical property: Chemical properties can not be determined unless a substance undergoes a change in its composition. If you answer the question ââ¬Å"Can I get the original substance back?â⬠with no, then you are observing chemical properties. Physical and Chemical Properties of two Metals (Mg & Cu) â⬠Data Collection Data Collection Observations for Magnesium: Process Observations a) Examine a piece of magnesium ribbon. Silver in color, shiny and smooth surface b) Attempt to bend a piece of magnesium ribbon. Breaks easily c) Obtain two 3 cm pieces of magnesium. Clean the surface of each with a piece of steel wool. Still silver in color, still shiny but became more smooth d) Place one of the pieces of magnesium ribbon from part c) into a test tube containing 3 mL of water. Add two drops of phenolphthalein solution and shake for 30 seconds. Liquid turned in a light pink e) Using crucible tongs, hold the other piece of magnesium ribbon in a burner flame to ignite the magnesium. Remove the burning magnesium from the flame and allow it to continue to burn. Save the ignition for part f) Got bright, then melted and turned white f) Place the ignition product from part e) into a test tube containing 3 mL of water. Add 2 drops of Phenolphtalein and shake for 30 seconds. Liquid turned in a light pink, ash is on the bottom of the test tube Add a 1 cm piece of magnesium ribbon to a test tube containing 1 mL of 2.0 mol/L HCL and observe for 30 seconds. got warm, liquid is bubbling (new gas created), the piece of magnesium ribbon turned white Add a 1 cm piece of magnesium ribbon to a test tube containing 1 mL of 2.0 mol/L nitric acid and observe for 5 minutes. Liquid is bubbling (new gas created), Liquid turned cloudy, got warm Physical and Chemical Properties of two Metals (Mg & Cu) â⬠Data Collection Data Collection Observations for Copper: Process Observations a) Examine a piece of copper wire. Bronze in color, smooth and shiny surface b) Attempt to bend a piece of copper wire. Does not break easily c) Obtain two 3 cm pieces of copper wire. Clean the surface of each with a piece of steel wool. Bronze in color, shiny and very smooth d) Place one of the pieces of copper wire from part c) into a test tube containing 3 mL of water. Add two drops of phenolphthalein solution and shake for 30 seconds. Liquid turned cloudy/white e) Using crucible tongs, hold the other piece of copper wire in a burner flame to ignite the copper. Remove the burning copper from the flame and allow it to continue to burn. Save the ignition for part f) Got warm, color of liquid turned grey, copper wire bends easily f) Place the ignition product from part e) into a test tube containing 3 mL of water. Add 2 drops of Phenolphtalein and shake for 30 seconds. No changes observed Add a 1 cm piece of copper wire to a test tube containing 1 mL of 2.0 mol/L HCL and observe for 30 seconds. No changes observed Add a 1 cm piece of copper wire to a test tube containing 1 mL of 2.0 mol/L nitric acid and observe for 5 minutes. No changes observed Physical and Chemical Properties of two Metals (Mg & Cu) â⬠Conclusion/ Evaluation Conclusion/Evaluation Conclusion In our experiments the magnesium seemed to have reacted better in our experiments than the copper, although some of their physical properties are the same, both are for example shiny in their color and have a smooth surface.. In three of our copper experiments no change took place whereas the magnesium always showed some kind of reaction to our experiment. But magnesium and copper do also seem to have some reactions in common, as to see at experiment D, where we took steel wool and cleaned the surface of the magnesium and copper, physical properties were observed, the surface of both got even more smooth and it got more shiny. We were observing a physical change in part C where the magnesium stripe broke easily, but the copper did not break easy at all. We were also observing chemical changes such as the boiling of the magnesium in experiment F, a new gas was created. Physical properties were observed in experiment E for the magnesium as well as the copper where the phenolphthalein and the water changed its color to pink with the magnesium and in a cloudy white with the copper stripe, meaning that magnesium, water and phenolphthalein or copper, water and phenolphthalein do change the color of the created. We did not observe any changes in experiments G,H and I for our copper stripes, whereas we observed changes in experiment H for the magnesium part where the liquid started bubbling, a new gas was thus created which is evidence for a chemical change. Evaluation This experiment showed very well how different copper and magnesium react by doing several similar experiments with each of them, but I think there is a lot of room for improvement because I am quite sure that there are either changes or specific properties occuring in parts G to I with the copper. The fact that no reaction took place might have been due to not enough liquid for those experiments, it might have been helpful to either add more or do several trails with each one having a different value of liquid in it. In general it is always better to have numerous trails, this would give us better evidence about changes which might not have been regular, but occured due to unpreciseness when doing the experiments. It might have also been interesting to measure the temperature of the boiling liquid, whether or not there is a difference between the reaction with copper and magnesium or not. We only had about 40 minutes to complete our entire experiment, which was, in my oppinion, not enough time to complete all steps properly with a high preciseness, more time would have been helpful, too.
Subscribe to:
Posts (Atom)